Additives for oil systems Wynn's W51364

Super Charge Oil Treatment is an additive in oil which prevents excessive oil consumption. Properties: It increases the oil viscosity index. It enhances resistance of the oil film under impact of high temperatures and high loads. It restores compression and pressure in the oil system. It stops excessive oil consumption and toxicity. It prevents boundary friction under high loads. It reduces engine operation noise. It protects from corrosion, oxidation, rust and wear. It is used with mineral, synthetic, one- and all-season oils. It is safe for catalytic convertors and turbochargers. Application: It is especially efficient under high loads, high operating temperatures and high noise levels from engine operation. It is recommended for all types of gasoline and diesel engines of vehicles and stationary equipment with high oil consumption, low pressure of the lubrication system and a low compression degree. It is especially efficient when used in old engines. In case of long-term engine operation, at high ambient temperatures, in case of towing a trailer, in case of full load of the vehicle, in case of a mixed driving mode. Instructions: To get the best results, use the additive at each oil change. Warm up the engine and stop it. Add the can of the additive of 425 ml in the oil filler of the engine with the new oil. Start the engine for better oil distribution. One can of 425-ml additive is diluted in 3.5 - 6 liters of motor oil. In case of using the engine in especially severe conditions or increased oil consumption, you can increase the concentration maximum up to 2 cans of the additive.