Additives for oil systems Bardahl 2812

Bardahl Full Metal Moto is a complex additive for your motorcycle developed by the latest requirements of manufacturers of modern four-stroke engines. Restoring effect - thanks to Polar Plus formula, it smoothens friction on cylinder walls. It comprises organic metal molecules which are inserted in each micro-crack caused by wear according to the temperature and pressure and restore hydraulic insulation of the piston and cylinder walls. Protected cold start. Polar Plus magnet oil film protects engine units when oil has not reached the cylinder walls and piston yet. Extreme protection - Fullerene C60 carbon molecules are 10 time stronger and 6 times lighter than steel and have a non-destroyable spherical shape. They act as micro-bearings between rubbing surfaces and allow significantly reducing friction and wear of engine parts even in the most severe operating conditions. Engine cleanliness - thanks to its unique formula without hard particles suspended in oil, Full Metal is an additive which does not contaminate the engine (lambda probe, particulate filter, ignition plugs, valves) and does not clog the oil filter. Fuel economy - Fullerene C60 molecules reduce friction between mechanical parts as they act as an air pillow which, consequently, leads to reduced fuel consumption. Compression recovery - it is an additive with synthetic polymers which increase density of the oil film at high temperatures. Polymers restore seals and eliminate cylinder-and-piston lubricant losses. Anti-smoke - the formula of polymers helps enlarge seals and prevents oil flow back in the combustion chamber, thus reducing oil consumption and environmental pollution. Add Full Metal additive in the warmed-up engine with fresh oil at each oil replacement or use as a top-up fluid. One bottle of 75 ml is enough for up to 3 liters of motor oil. It is used as a preventive measure and as a restoring additive.