Lithium lubricant Mobil 146374

Mobilux™ EP 0, 1, 2, 3, 004 and 023 products refer to the series of highly efficient lubricants: five multi-purpose industrial greases and two semi-liquid specialized greases. These greases with a thickener based on lithium hydroxystearate ensure exceptional reliable protection against wear, rust and washing off with water. They are produced at the range from 00 to 3 by NLGI classification with the viscosity grade of the base oil by ISO VG 150 and 320. Mobilux EP 0, 1, 2 and 3 greases are recommended for most types of industrial equipment, including equipment, operating in severe modes under the conditions of high pressures or impact loads. These greases ensure excellent protection against rusting and corrosion, have resistance to washing off with water, which makes them especially suitable for equipment where moisture presence is typical. Mobilux EP 0 and 1 are suitable for centralized lubrication systems. Mobilux EP 2 and 3 are multi-purpose greases. The recommended operating temperature range: from -20 C to 130 C. But they can be applied at higher temperatures if the lubrication frequency is increased accordingly. Mobilux EP 004 and Mobilux EP 023 greases are especially suitable for lubrication of closed gear units and bearings of transmissions with non-tight seals; they can be used in many other cases, when usual gear oils cannot retain in the gear casing, chain box, etc. due to leakages because of wear or lack of seals. It is recommended for the operating temperature ranges from -25 to 120°C for Mobilux EP 004 and from -15 to 120°C for Mobilux EP 023. Features and benefits. There is long-term experience of successful application of Mobilux EP lubricating materials, which showed good performance properties with regard to corrosive protection, low-temperature pumpability and the long-term service life at high temperatures. The limit load on the Timken friction machine is 40 pounds, which confirms their property to sustain high loads and limit pressure values. Wear reduction in the severe conditions or under impact loads and vibration to ensure reliability and performance readiness of equipment. Protection against rust and corrosion, resistance to washing off with water and good equipment lubrication even at the water presence. Prolongation of the service life of bearings in wet conditions, which lets reduce costs on the bearings and prevent unscheduled downtimes. Good pumpability in centralized lubrication systems (Mobilux EP 0 and 1). Efficient prevention of leakages (Mobilux EP 004 and Mobilux EP 023). Application. Mobilux EP 0 and Mobilux EP 1 lubricants ensure good pumpability at low temperatures and can be used in centralized lubrication systems and other systems, where good low-temperature properties are required. Mobilux EP 2 is recommended as a universal lubricant.